Ductile fracture of high strength steels with morphological anisotropy, Part I: Characterization, testing, and void nucleation law
(2021) Engineering Fracture Mechanics — Vol. 244, p. 107569 (2021)
Files
Marteleur2021_-_Ductile_fracture_of_high_strength_steels_with_morphological_anisotropy_-_Part_I.pdf
Open Access - Adobe PDF
- 44.97 MB
Details
- Authors
Marteleur, Matthieu 
Nguyen, Van Dung
- Abstract
- The ductile fracture behavior of a high strength steel is investigated using a micromechanicsbased approach with the objective to build a predictive framework for the fracture strain and crack propagation under different loading conditions. Part I of this study describes the experimental results and the determination of the elastoplastic behavior and damage nucleation under different stress triaxiality and Lode parameter values. The damage mechanism starts early void nucleation from elongated inclusions, either by particle cracking under loading oriented along the major axis, or by matrix decohesion when the main loading is transverse. Void nucleation is followed by plastic growth and coalescence. The long inclusion axis is preferentially aligned in one direction leading to significant failure anisotropy with the fracture strain in the transverse direction being almost 50% lower compared to the longitudinal one, even though the plastic behavior is isotropic. The experimental data are first used to calibrate the elastoplastic model. An enhanced anisotropic nucleation model is then developed and integrated into the Gurson–Tvergaard–Needleman scheme. The parameters identification of the anisotropic nucleation model is finally performed and validated towards the experimental results. All these elements are subsequently used in Part II to simulate the full failure behavior of all testing specimens in the entire spectrum of stress states, from nucleation to final failure.
- Affiliations
University of Liège Computational & Multiscale Mechanics of Materials (CM3), Department of Aerospace and Mechanical Engineering
Citations
Marteleur, M., Leclerc, J., Colla, M.-S., Nguyen, V. D., Noels, L., & Pardoen, T. (2021). Ductile fracture of high strength steels with morphological anisotropy, Part I: Characterization, testing, and void nucleation law. Engineering Fracture Mechanics, 244, 107569. https://doi.org/10.1016/j.engfracmech.2021.107569 (Original work published 2021)